Manna gum
A very fast growing Eucalyptus preferring 800 mm+ of rainfall annually and light to medium textured soils that are free draining. Often included in trials and usually performs well. However, its poor sawing performance and durability means that other species are often preferred.
Manna gum |
|
|
Botanical name |
Eucalyptus viminalis |
|
Growth rate in preferred conditions |
Very fast |
|
Estimated rotation length (yr) in preferred conditions to produce 60 cm diameter at breast height |
20-30 |
|
Preferred annual rainfall (mm/yr) |
800+ |
|
Minimum rainfall (mm/yr) |
700 |
|
Preferred elevation (m) asl |
0-700 |
|
Preferred landscape position |
Lower slopes and valley positions |
|
Preferred Soil |
Light to medium textured soils that are free draining |
|
Prohibitive soil |
Wet/heavy clay |
|
Poor drainage tolerance |
Moderate |
|
Dry site tolerance |
Moderate |
|
Frost tolerance |
High |
|
Pest and disease problems: |
Eucalyptus weevil, Christmas beetle, Sawfly larvae. |
Timber Characteristics1 |
|
|
Strength: seasoned timber only |
SD4-moderate |
|
Durability1: in ground | above ground |
4 | 3 |
|
Drying: green to 12% moisture content |
Difficult to dry without considerable degrade. Quarter sawing followed by slow drying regime required. Shrinkage about 6% radial and 12% tangential. |
|
Main commercial products |
Panelling, internal flooring, building framing, interior joinery, tool handles. |
|
Bushfire resistance2: measured by Bushfire Attack Level (BAL) |
BAL 12.5 and 19 – All AS3959 required applications |
|
Least attractive features |
Drying difficulties limit availability. Sapwood susceptible to Lyctid borer. |
|
Most attractive features |
Fast growth, on a wide range of sites where rainfall >700 mm/yr. Easy timber to work. |
|
Status as a plantation species in Gippsland |
Often included in trials and usually performs well. However, its poor sawing performance and durability mean that other species are preferred. |
|
1 Based on Australian Standard: Timber Natural durability ratings. AS 5604-2005. Refer to Appendix for explanatory table. Where (?) applied, rating is based on field experience. 2 Naturally bushfire resisting timbers are those with inherent bushfire resisting properties. For more information refer to Australian Standard 3959:2018. |
|
Assumptions and notes:
- Sites considered for planting contain at least 1 metre of soil above an impeding layer (e.g. bedrock or layer impenetrable to roots.)
- Please note that most (if not all) eucalypts in Gippsland grow best on sheltered sites.
- Overall slow drying time across air and kiln dried schedules is recommended to minimise drying degrade. This is the best starting point for inexperienced operators.
Beadle, C.L. and Brown, A.G. (eds) 2007. Acacia Utilisation and Management: Adding Value. RIRDC Publication No. 07/095, Rural Industries Research and Development Corporation, Canberra.
Boland, D.J. et. al (1992). Forest Trees of Australia. CSIRO Australia.
Bootle, K.R. (1983). Wood in Australia – Types, properties and uses. McGraw Hill, Australia
Carnegie, A.J. (2002). Field Guide to Common Pests and Diseases in Eucalypt Plantations in NSW. Research and Development Division of State Forests, NSW.
Clarke, B., McLeod, I. and Vercoe, T (eds) 2009. Trees for farm forestry: 22 Promising Species. RIRDC Publication No. 09/015. Rural Industries Research and Development Corporation, Canberra.
http://www.rajalaut.com/download/AS%205604-2005%20Timber%20-%20Natural%20durability%20ratings.pdf
https://www.nzffa.org.nz/farm-forestry-model/species-selection-tool/species/cypress/macrocarpa/
https://www.nzffa.org.nz/system/assets/2056/Eucalypt_Information_Note_1_-_Choosing_eucalypts.pdf
https://www.nzffa.org.nz/farm-forestry-model/species-selection-tool/species/redwood/coast-redwood/
https://www.utas.edu.au/__data/assets/pdf_file/0020/511553/Silverwattle.pdf
Mortimer, J. (2003). A selection of alternative timbers. Taitua Books, NZ.
National Association of Forest Industries (2004). Timber Species and Properties (Revised edition). Timber Manual Datafile P1
Nicholas, I.D., Gifford, H.H., and Kimberely, M.O. (1997). Siting Black Walnut. FRI Bulletin no. 188
Phillips, C. (1996). Insects, Diseases and Deficiencies associated with Eucalypts in South Australia. Primary Industries SA Forests.
Poole, B., Waugh, G. and Yang, J.L. (2017). Potential for growing and processing durable eucalypts in New Zealand. Publication No. SWP-T036. Solid Wood Innovation. Specialty Wood Products Research Partnership.
Reid, R. (2017). Heartwood. The art and science of growing trees for conservation and profit. Melbourne Books.
Tepper, C. J. (2002). Plantation Eucalypt species for solid wood products – a profile of Eucalyptus muelleriana. Gottstein Fellowship Report for the Gottstein Memorial Trust
Tepper, C.J. (2008). Site Matching and Establishing Eucalypt Sawlog Species in Southern Australia In. Beadle, C.L. and Brown, A.G. (eds) 2008. Plantation Eucalypts for High Value Timber. RIRDC Publication No. 08/113, Rural Industries Research and Development Corporation, Canberra.